# How to erase/clear plants？

## Erasers

Set the radius of the eraser to remove all plant models drawn with the Brush and Fill tools within the radius.

  * **After selecting a plant model and then selecting Eraser** , only the current selected plant models can be erased in the scene.

  * **If no plant models are selected** , it will erase all plants created by the Brush and Fill tools.

::: tip Note
You can use **the shortcut Alt** to switch between Brush & Eraser.
:::

![image](https://docs-static.d5render.com/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces/-MjbN1iGmN_HBnj_fyU9/uploads/VAURtlVKGqlUG1Yj3hzy/alt22_compressed.gif)

## Clear

The Clear tool will remove all models drawn with the Brush and Fill tools within the current range at once.

> Make the Eraser tool's radius the maximum to enable the Clear tool. 

  * (The way the model is cleared is the same as the eraser.)

**If plants are selected** , only the selection is cleared. 

  * **If no plants are selected** , all will be cleared.

<figure class="doc-image doc-image--stack">
  <img src="https://docs-static.d5render.com/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces/-MjbN1iGmN_HBnj_fyU9/uploads/nmxn2Ndyh9L3E8hLhekx/Dingtalk_20241119153321.jpg" alt="Clear" />
  <figcaption>Clear</figcaption>
</figure>